دبی‌سنج الکترومغناطیسی اینزرشن TORPEE-MAG

Torpee MAG

خانه » shop page en » Flowmeter » pipeline » Insertion Electromagnatic » Torpee MAG

TORPEE-MAG is a comprehensive electromagnetic insertion flow meter with multiple electrodes distributed across its body, reporting the average flow rate throughout the full diameter of the measured pipe. The unique design of this multi-electrode electromagnetic flow meter allows it to calculate variable flow profiles, including turbulent and agitated conditions, and enables calibration-free on-site installation.

TORPEE-MAG can be installed without shutting down the system, draining, or cutting pipes (Hot-Tap installation). It requires no flange welding and can be installed in pressurized pipelines up to 17 bars. The installation costs are significantly reduced without the need for heavy equipment (cranes, etc.) or multiple manpower. Economically, TORPEE-MAG stands out as the most cost-effective solution for measuring flow in medium and large pipe sensor applications, drastically reducing installation expenses.

TORPEE-MAG excels in confined spaces, can be submerged in water, and provides full accessibility. It is suitable for pressurized pipes, allowing easy inspection, cleaning, and calibration separation. Especially beneficial for cost-effective applications, TORPEE-MAG is available in two sizes, designed for use with 1.5 or 2-inch ball valves. The TORPEE-MAG 1.5-inch version accommodates pipe sizes from DN100 to DN1500, while the TORPEE-MAG 2-inch version covers pipe sizes from DN1000 to DN2500. It is worth mentioning that you can procure TORPEE-MAG electromagnetic flow meter from the exclusive representative of Flow Tronic in Iran, AbSanj Mehr.

دبی‌سنج اینزرشن TORPEE-MAG

شروع قیمت از :

افزودن به سبد خرید

Loading...

• Design and incorporation of multiple electrodes at specific intervals relative to each other, considering the pipe diameter and flow profile.
• Exceptional accuracy due to measuring fluid velocity at multiple points.
• No need for pipe cutting or draining water during installation due to the inclusion of a Hot Tap valve.
• Body material made of graphite, providing high resistance.
• Available in two types: 1.5 and 2 inches (probe diameter).
• Suitable for diameters ranging from 50 to 1500 millimeters.

• Size: AVI-MAG TM 2 “ From DN1800 to DN2000
• Weight: Depending on size of sensor
• Materials:
o Sensor body: 316 Stainless Steel, fiberglass derivate
o Insertion hardware: 316 stainless steels
o Seal: silicon rubber (EPDM)
• Sensor electrodes: graphite
• Cable lengths: Available from 10 m
• Protection: IP68 (sensor is submersible)
• Certifications: CE, WRAS (pending)
• Process Connection: Min.48mm clear diameter for 2 “AVI-MAGTM
• Suggested Straight inlet run :10×DN (for max. accuracy)
• Suggested Straight outlet run: 5×DN ( for max. accuracy)
• Warranty: 2 years
• Velocity Measurement Method: Electromagnetic
• Range: 0 to 6 m/s (max. velocity possible depending from pipe 0 and sensor type)
• Accuracy: +/- 0.5% of reading +/- Zero Stability
• Operating pressure: Max. 16bar
• Fluid temperature limits: -10°C (not freezing) to +60°C at 16 bar

Partially Filled Pipes

Catalog

Loading...

• Design and incorporation of multiple electrodes at specific intervals relative to each other, considering the pipe diameter and flow profile.
• Exceptional accuracy due to measuring fluid velocity at multiple points.
• No need for pipe cutting or draining water during installation due to the inclusion of a Hot Tap valve.
• Body material made of graphite, providing high resistance.
• Available in two types: 1.5 and 2 inches (probe diameter).
• Suitable for diameters ranging from 50 to 1500 millimeters.

• Size: AVI-MAG TM 2 “ From DN1800 to DN2000
• Weight: Depending on size of sensor
• Materials:
o Sensor body: 316 Stainless Steel, fiberglass derivate
o Insertion hardware: 316 stainless steels
o Seal: silicon rubber (EPDM)
• Sensor electrodes: graphite
• Cable lengths: Available from 10 m
• Protection: IP68 (sensor is submersible)
• Certifications: CE, WRAS (pending)
• Process Connection: Min.48mm clear diameter for 2 “AVI-MAGTM
• Suggested Straight inlet run :10×DN (for max. accuracy)
• Suggested Straight outlet run: 5×DN ( for max. accuracy)
• Warranty: 2 years
• Velocity Measurement Method: Electromagnetic
• Range: 0 to 6 m/s (max. velocity possible depending from pipe 0 and sensor type)
• Accuracy: +/- 0.5% of reading +/- Zero Stability
• Operating pressure: Max. 16bar
• Fluid temperature limits: -10°C (not freezing) to +60°C at 16 bar

Partially Filled Pipes

Catalog

سوالی دارید و یا به پشتیبانی نیاز دارید؟

AbSanj Mehr Co.

Field measurement Instruments, Control, and Automation for Water and Wastewater Industries and Facilities.

Absanj Mehr Company, a technical, engineering, and trading company, was established with the aim of providing state-of-the-art equipment and devices for measuring, controlling, and automating fluids in water and wastewater industries, chemical and food industries. We also specialize in supplying cutting-edge environmental equipment in line with the latest global technology. Elevate your industry with Absanj Mehr, where precision meets innovation in fluid management.

Unit 7, 3rd floor, No. 17, Third str. , Asadabadi str. Valiasr Ave. Tehran ,Iran

Postal Code : 1433633647

+98 9122147458

+98 021 88557352 54

+98 9122147458