ACTEON 5000
The ACTEON 5000 display panel allows for connection of two digital sensors, enabling monitoring of components such as pH, ORP, temperature, dissolved oxygen (optical), conductivity, salinity, turbidity (NTU and mg/L), UV254, TOC, COD, BOD, suspended solids (g/L), and Sludge Blanket detection.
Measured values can be displayed using both analog and digital transmission methods, while preset functions optimize process control regulations.
– Digital communication technology
– Two input sensors
– Two analog inputs and two relay inputs
– Digital output via MODBUS and Ethernet
– Large graphic display capable of visualizing up to 4 measurements
– 4-20 ma output, with programmable relays displayed on the main screen
– Easy and quick visual programming
– Broad selection of digital sensors
: Software and features
Digital sensor : 2 inputs digital sensor RS485
2 analog input : In mode 0/4-20 mA or 0-10 V
2 relay input : Function of transfer on exit(release) TOR
Information of external cleaning system : swing in maintenance mode
2 analog outputs : Choice of 2 parameters programmable according to the connected sensor
Programming PID
2 digital outputs /relay : NO/NF customizable
Instruction point : setting of the measuring range
(Hysteresys / activation way) and time of activation
Command for external cleaning system
Output alarm for defect material sensor
Digital output : Modbus RTU
Ethernet TCP IP
Data recording : Internal flash memory
Frequency recording : 1-120 mn
Recording journal of events, measure sensors
Atmospheric pressure sensor : To compensate oxygen pression
: Characteristics
Display : Backlit graphic LCD touch Screen – Size95x54 mm
Analog outputs : 0/4.00 – 20.00 mA with galvanic isolation
Charge max 250
Relay outputs : 6 A /250 V
Operating conditions : Temperature : -15°C to + 50 °C
Temperature of storage/transport : -15°C to + 50°C
USB port : Unloading of the recorded data
Power/ Electrical protections : 100-240 V AC/DC 50-60 Hz
– Option 9-28 V DC/DC
– Electrical protection: consistent EN61010-1 :2010
Dimensions : (LxHxP) : 213 x 185 x 84 mm
Material : Grey ABS
Protection rating : IP 65
Front : Antireflective polyester
– Wastewater treatment plant (aeration tanks for control/regulation of nitrification/denitrification processes)
– Drinking water control
– Industrial wastewater treatment
– Level water monitoring
– Fish farming
– Digital communication technology
– Two input sensors
– Two analog inputs and two relay inputs
– Digital output via MODBUS and Ethernet
– Large graphic display capable of visualizing up to 4 measurements
– 4-20 ma output, with programmable relays displayed on the main screen
– Easy and quick visual programming
– Broad selection of digital sensors
: Software and features
Digital sensor : 2 inputs digital sensor RS485
2 analog input : In mode 0/4-20 mA or 0-10 V
2 relay input : Function of transfer on exit(release) TOR
Information of external cleaning system : swing in maintenance mode
2 analog outputs : Choice of 2 parameters programmable according to the connected sensor
Programming PID
2 digital outputs /relay : NO/NF customizable
Instruction point : setting of the measuring range
(Hysteresys / activation way) and time of activation
Command for external cleaning system
Output alarm for defect material sensor
Digital output : Modbus RTU
Ethernet TCP IP
Data recording : Internal flash memory
Frequency recording : 1-120 mn
Recording journal of events, measure sensors
Atmospheric pressure sensor : To compensate oxygen pression
: Characteristics
Display : Backlit graphic LCD touch Screen – Size95x54 mm
Analog outputs : 0/4.00 – 20.00 mA with galvanic isolation
Charge max 250
Relay outputs : 6 A /250 V
Operating conditions : Temperature : -15°C to + 50 °C
Temperature of storage/transport : -15°C to + 50°C
USB port : Unloading of the recorded data
Power/ Electrical protections : 100-240 V AC/DC 50-60 Hz
– Option 9-28 V DC/DC
– Electrical protection: consistent EN61010-1 :2010
Dimensions : (LxHxP) : 213 x 185 x 84 mm
Material : Grey ABS
Protection rating : IP 65
Front : Antireflective polyester
– Wastewater treatment plant (aeration tanks for control/regulation of nitrification/denitrification processes)
– Drinking water control
– Industrial wastewater treatment
– Level water monitoring
– Fish farming
سوالی دارید و یا به پشتیبانی نیاز دارید؟
AbSanj Mehr Co.
Field measurement Instruments, Control, and Automation for Water and Wastewater Industries and Facilities.
Absanj Mehr Company, a technical, engineering, and trading company, was established with the aim of providing state-of-the-art equipment and devices for measuring, controlling, and automating fluids in water and wastewater industries, chemical and food industries. We also specialize in supplying cutting-edge environmental equipment in line with the latest global technology. Elevate your industry with Absanj Mehr, where precision meets innovation in fluid management.
Unit 7, 3rd floor, No. 17, Third str. , Asadabadi str. Valiasr Ave. Tehran ,Iran
Postal Code : 1433633647
